Rear Panel Connectors and Indicators
The rear connectors and indicators are listed below.
| Item | Description |
|---|---|
| A | Internal power connector. Mains power lead with internal power supply. |
| B | Grounding screw. |
| C |
General Purpose Input/Output connectors x2 (DB-9F).
|
| D | XLR 2-wire Partyline connectors |
| E | RJ45 4-wire audio and data connectors. Port 8 is dedicated to Program Feed (PGM) and Stage Announce (SA), to be used with the split RJ45 cable connector that is supplied with the Base Station. |
| F | Dect Sync RJ45 connectors, IN, OUT. |
| G | E1 RJ45 connectors to splitter/transceiver. Do not connect IP transceivers here. |
| H | SFP cage for E1 fiber connection to splitter/transceiver. Either single-mode or multi-mode fiber modules. Modules must match existing cabling. Do not connect IP transceivers here. Connections to splitters can be Ethernet, Fiber, or a combination of both. If you use Fiber cable, you must set the port to a Fiber connection (default is RJ45) in the CCM (CCM > Host > Wireless > Wireless Transceivers). |
| I | RJ45 LAN connectors. IP transceivers, the configuration PC and Dante are connected here. Capacity 1Gb. |
| J | SFP cage for fiber LAN connectors. Capacity 2.5Gb. |
| K | SA/PGM. RJ45 for SA and RJ45 to XLR for PGM. |
| L | External power supply connector (12V DC). CAUTION: Before using, see System Powering. |